HDMI/DVI/VGA轉SDI

1.    Introduion

The ALL to SDI Scaler Converter allows you to upscale Composite,VGA,DVI,HDMI signals to high definition video of SDI formats (HD-SDI SMPTE 292M.3G-SDI 424M/425M), then output to both ports at the same time.

2.    Features

Ø  Supports HDMI, DVI, VGA.Composite Video input signals;

Ø  Supports two SDI output simultaneously;

Ø  Supports SDI output distance up to 100 meters (3G-SDI),.200 meters (HD-SDI);  

Ø  Scales any input signal to the HD-SDI.3G-SDI output signals;

Ø  Supports HDMI input timings: [email protected] ~ [email protected] & 480i [email protected] Hz;

Ø  Supports VGA/DVI input timings: [email protected] ~1920×[email protected] Hz;

Ø  Supports Composite Video input timings NTSC, PAL,SECAM;

Ø  Supports Black screen signal output;

3.    Package Contents

Ø  ALL to SDI Scaler Converter         1pcs

Ø  12V/2.5A DC power adaptor        1pcs

Ø  Operation Manual                 1pcs

4.    Specification

SDI Transmission Rates    2.970 Gbps, 1.485 Gbps
Video Bandwidth          165 MHz
Input Ports               1×HDMI (Type A conneor),

1×DVI with Audio

1x VGA with Audio
                         1×Composite with R/L
Output port              2×SDI (HD/3G-SDI), 
SDI Cable Distance        3G/HD/up to 100/200 meters with
                         BELDEN 1694A cable
HDMI Cable Distance       Input: 10 m, 8/12-bit
Input HDMI Timing Support  [email protected], [email protected], [email protected], [email protected],
                            [email protected],[email protected],[email protected], [email protected],
                            [email protected], [email protected]/60, [email protected]/60,
                            [email protected]/25/30/50/60;
Input VGA/DVI Timing Support  [email protected], [email protected], [email protected],
                               [email protected], [email protected],[email protected],

1920×[email protected]
Input Composite Support    NTSC, PAL,SECAM
Output Timing Support     SDI:  SMPTE 292M (1.485 Gbit/s) &

  SMPTE 424M/425M (2.970 Gbit/s)
ESD Proteion Human-body Model:
                         ±8kV (air-gap discharge)
                         ±4kV (conta discharge)
Dimensions             110mm (W)×288mm (D)×32 mm (H)
Weight                  750 g
Chassis Material         Metal
Operating Temperature   0?C~40?C / 32?F ~ 104?F
Storage temperature     -20?C~60?C / -4?F ~ 140?F
Relative Humidity        20~90% RH (no condensation)
Power Consumption      5W

5.    Operation.Fuions

5.1 Front panel

1.       INPUT BOTTONS: Press these buttons to . the input source.

2.       RESOLUTION BOTTONS: Press these buttons to . the SDI output resolution.

5.2 Rear panel

1.     OUTPUT: The two SDI output is . you conne the SDI monitor with SDI cable for input source display.

2.     Input: These slot is . you conne the HDMI/DVI/VGA/Composite source output from DVD, PS3,Set-top Box.Note Book.

3.     DC 12V: Plug the 12V DC power supply into the unit.conne the adaptor to AC wall outlet.

4.     ON/OFF: Power ON/OFF.

更多相關介紹：http://www.xinyad.com/index.php?_m=mod_produ&_a=prdlist&cap_id=108