臺 灣金和車床CH530*1700

項目 CH-530 容量 床面上旋徑Swing over bed 532mm 鞍面上旋徑Swing over carriage 368mm 凹口上旋徑Swing over gap 710mm 兩心間距離Distance between centers(A1-6,A2-6) 767,1067,1667mm 床面寬度Width of bed 300mm 車刀臺行程 145mm 橫身滑座行程Stroke of cross slide 265mm 主軸箱 主軸孔徑Spindle bore 58mm(78mm)″ 主軸孔及中心針斜度Taper.spindle bore &se;center MT6×MT4 主軸鼻端Spindle nose A1-6,D1-6(A2-6) ″ 主軸速度變換數Number of spindle speeds 12 主軸速度Spindle speed(60HZ) ￠58mm:35,52,75,110,160,230,330,490,650,950,1350,2000rpm ￠78mm:29,43,62,90,130,190,275,405,540,790,1120,1650rpm 螺紋和進給 進給變換數Number of feeds 36 縱向進給范圍Range of longitudinal feeds 公制 metric 0.037-1.04mm/rev(P=6mm) 0.035-0.98mm/rev(4TPI) 橫向進給范圍Range of cross feeds 1/2縱向進給 Half of longitudinal feeds 導螺桿直徑Leadscrew diameter 35mm 導螺桿螺距Leadscrew pitch 4TPI,P=6mm 英制螺紋范圍Range of inch pitches 2-72TPI(44 Kinds) 公制螺紋范圍Range of metric pitches 0.2-14mm(39 Kinds) 尾座 Tailstock 心軸移動量 Quill stroke 170mm 心軸直徑 Quill diameter 60mm 心軸斜度 Quill taper MT#4 馬達 Motor 主軸馬達（30分）Main motor(30 min.) 5HP(7.5HP) ″ 切削液馬達Coolant pump motor 1/8HP 機械尺寸Machine dimension 機械高度Height 1400mm 佔地面積Floor space 2000,2300,2900×1000mm 機械重量 Weight 1600,1700,1900kgs